Home > Products > Prefinished Exterior Wood Siding > Prefinished Douglas Fir Siding > Douglas Fir Board and Batten Siding >

Douglas Fir Board and Batten Siding - Bleaching Stain
Douglas Fir board and batten siding prefinished in a Bleaching Stain
 


Availability: Usually Ships in 2 to 4 Weeks
Product Code: DFBBS-BLEACHING-STAIN

Questions?
Call us: 704-528-7136
request

Description
 

We take the beauty of natural Douglas Fir board and batten siding and factory finish it in this beautiful Bleaching Stain to give your home a true custom look. This type of stain allows the natural wood texture to show through and changes the wood to a white/gray weathered wood tone. We machine apply the stain, which allows us to make sure all six sides are coated. When factory finished, the wood is protected against water and sun damage that can occur when installing raw and then painting or staining in the field. The stain provides a water repellent and beautiful rich finish.

Grades Available

The grade is #1 and better. This knotty product provides a rustic look and is a kiln dried product. Board lengths are available in 8' to 16' random lengths only.

Benefits of Pre-Finishing Your Siding

  • Instant Curb Appeal
  • No Weather Delays
  • Pre-Finishing is available year-round - Our facility is climate controlled and machines run all 12 months.
  • Instant UV and Moisture Protection
  • No Lap Marks
  • No Streaking
  • No Shrink Lines
  • No Overspray or Drips
  • Cost Savings vs. Field Painting
  • Six Sided Protection
  • Factory Controlled Quality - Each board will have a consistent color not only from one end to the other but from the first piece to the last piece the color will be the same.
  • Material is dry prior to installation

Request a Sample:

Call us at 704-528-7136 or fill out our Sample Request Form to have a sample mailed to you.

Note: Computer monitors have inherent limitations, and electronically reproducing color on the Internet is imprecise. Therefore, we cannot assure you that what you see accurately portrays the color. We have gone to great lengths to portray colors as accurately as possible.

Product Details


  • Board Thickness: 1" Nominal (3/4" Actual)
  • Board Width: 12" Nominal (11-1/8" Actual)
  • Batten Width: 4" Nominal (3-1/2" Actual)
  • Grade: #1 and better, Rough Face, KD (Kiln Dried)
  • Material Length: Random Lengths 8'-16'

Share your knowledge of this product with other customers... Be the first to write a review


Cypress Nickel Gap Siding - Ginger Stain
LP SmartSide, Nickel Gap Cedar Texture Siding - Sagebrush