Home > Products > Prefinished Siding > Prefinished Exterior Wood Siding > Prefinished Cypress Siding >

Prefinished Cypress Tongue And Groove Siding V-Joint - Dark Gray Stain

Prefinished Cypress Tongue And Groove Siding V-Joint - Dark Slate Stain
#2 Common Grade Cypress Tongue and Groove V-Joint

Alternative Views:

Availability: Usually Ships in 4 to 6 Weeks

Call us for a Dealer Near You
Phone: 704-528-7136


Cypress Tongue and Groove Siding Prefinished Dark Slate Semi-Solid Stain

We take the beauty of Cypress wood and factory finish it with a beautiful Dark Slate semi-solid stain to give your home a true custom look. The semi-solid stain allows the natural texture of the wood to be seen but changes the tone to a dark weathered gray color. The stain is factory applied to all six sides giving it protection against water and sun damage along with saving time and money at the job site. The oil in the stain penetrates the wood and protects more than just the surface of the board making it water repellent and provides a mildew resistant rich finish.

Grades Available

Many of our products are available in Select (highest grade possible - occasional tight pin knot acceptable) or #2 Common Grade - sound and possible unsound knots are acceptable.

Profiles Available

Profile shown above is a smooth face V-Joint profile which gives you a distinct v-joint where each board comes together.

Benefits of Pre-Finishing Your Siding

  • Instant Curb Appeal - As the siding is installed you can see the house come to life as there is no waiting for a painter to arrive on site to cover factory primed boards.
  • No Weather Delays - No weather delays due to poor weather conditions that prohibit a painter from applying the final color coat.
  • Pre-Finishing is available year round - Our facility is climate controlled and machines run all 12 months.
  • Instant UV and Moisture Protection
  • No Lap Marks
  • No Streaking
  • No Shrink Lines
  • No Overspray or Drips
  • Cost Savings vs. Field Painting
  • Six Sided Protection
  • Factory Controlled Quality - Each board will have a consistent color not only from one end to the other but from the first piece to the last piece the color will be the same.
  • Material is dry prior to installation
Note: Computer monitors have inherent limitations, and electronically reproducing color on the Internet is imprecise. Therefore, we cannot assure you that what you see accurately portrays the color. We have gone to great lengths to portray colors as accurately as possible.

Product Details

Sizes: 1" x 6" or 1" x 8" (Nominal Size) V-Joint Tongue and Groove
Material Length: Random lengths from 8' to 16'

Coverage Chart

Nominal Width (In.) Dressed Width (In.) Exposed Face (In.) Linear Feet Factor
6" 5-1/2" 5" 2.40
8" 7-1/4" 6-3/4" 1.78

Call us: 704-528-7136

request more information button

Share your knowledge of this product with other customers... Be the first to write a review