Home > Products > Prefinished Siding > Prefinished Exterior Wood Siding > Prefinished Cypress Siding > Cypress Board and Batten Siding >

Cypress Board and Batten Siding - Nantucket White Stain

Cypress board and batten siding prefinished in an off-white stain


 

Availability: Usually Ships in 2 to 4 Weeks
Product Code: CYBBS-NANTUCKET-WHITE

Call us for a Dealer Near You
Phone: 704-528-7136

Description
 

We take the beauty of natural Cypress board and batten siding and factory finish it in this beautiful Nantucket White stain to give your home a true custom look. This type of stain allows the natural wood texture to show through and changes the wood to an off white color with a hint of beige. We machine apply the stain, which allows us to make sure all six sides get coated. When factory finished, the wood is protected against water and sun damage that can occur when installing raw and then painting or staining in the field. The stain provides a water repellent and beautiful rich finish.

Grades Available

Many of our products are available in Select (highest grade possible - occasional tight pin knot acceptable) or #2 Common Grade - sound and possible unsound knots are acceptable.

Benefits of Pre-Finishing Your Siding

  • Instant Curb Appeal - As the siding is installed you can see the house come to life as there is no waiting for a painter to arrive on-site to cover factory primed boards.
  • No Weather Delays - No weather delays due to poor weather conditions that prohibit a painter from applying the final color coat.
  • Pre-Finishing is available year-round - Our facility is climate controlled and machines run all 12 months.
  • Instant UV and Moisture Protection
  • No Lap Marks
  • No Streaking
  • No Shrink Lines
  • No Overspray or Drips
  • Cost Savings vs. Field Painting
  • Six Sided Protection
  • Factory Controlled Quality - Each board will have a consistent color not only from one end to the other but from the first piece to the last piece the color will be the same.
  • Material is dry prior to installation

Request a Sample:

Call us at 704-528-7136 or fill out our Sample Request Form to have a sample mailed to you.

Note: Computer monitors have inherent limitations, and electronically reproducing color on the Internet is imprecise. Therefore, we cannot assure you that what you see accurately portrays the color. We have gone to great lengths to portray colors as accurately as possible.

Product Details


  • Board Thickness: 1" Nominal (3/4" Actual)
  • Board Width: 12" Nominal (11-1/8" Actual)
  • Batten Width: 4" Nominal (3-1/2" Actual)
  • Grade: #2 Common, S1S2E (Surfaced one side, two edges) Rough Face, KD (Kiln Dried)
  • Material Length: Random Lengths 8'-16'

Share your knowledge of this product with other customers... Be the first to write a review