Home > Products > Prefinished Siding > Prefinished Wood Siding > Prefinished Cedar Beveled Siding >

Prefinished Cedar Plain Bevel Siding - Thatch Stain
Prefinished Cedar Plain Bevel Siding - Thatch Semi-Transparent Stain


 

Availability: Usually Ships in 2 to 4 Weeks
Product Code: CBS-THATCH-ST

Call us for a Dealer Near You
Phone: 704-528-7136

Description Technical Specs
 

Pre-Finished Cedar Plain Bevel Siding - Legacy Thatch Semi-Transparent Stain

Bevel Siding (also known as clapboard, lap siding or weatherboard) is a type of siding where the boards are installed horizontally with the top board overlapping the bottom to provide a seal to protect the interior of the home. The use of Western Red Cedar for bevel siding is one of the most widely-used siding types. The bottom side (or butt side) will be thicker than the top side of the board and most of the time one side will be rough cut and the other side will be smooth.

Take the beauty of real Cedar wood and factory finish it with a semi-transparent stain to give the wood some color but still allow the natural wood texture to be seen. The stain is factory applied to all six sides giving it protection against water and sun damage along with saving time and money at the job site. The oil in the stain penetrates the wood and protects more than just the surface of the board making it water repellent and provides a mildew resistant rich finish. Semi-transparent stains will last longer than a transparent stain but not as long as a solid color stain.

Wood Grades:

STK - Select Tight Knot - Sound and tight knots

Why Pre-Finish?
  • Instant Curb Appeal - As the siding is installed you can see the house come to life as there is no waiting for a painter to arrive on site to cover factory primed boards.
  • No Weather Delays - No weather delays due to poor weather conditions that prohibit a painter from applying the final color coat.
  • Pre-Finishing is available year round - Our facility is climate controlled and machines run all 12 months.
  • Instant UV and Moisture Protection
  • No Lap Marks
  • No Streaking
  • No Shrink Lines
  • No Overspray or Drips
  • Cost Savings vs. Field Painting
  • Six Sided Protection
  • Factory Controlled Quality - Each board will have a consistent color not only from one end to the other but from the first piece to the last piece the color will be the same.
  • Material is dry prior to installation
  • Coating Warranties are Available
  • "Green"/Low V.O.C. Coatings are available.

Product Details


Sizes: 11/16" x 6" Bevel Siding or 11/16" x 8" Bevel Siding
Material Length: Random lengths from 8' to 16'

Coverage Chart

Nominal Width (In.) Dressed Width (In.) Exposed Face (In.) Linear Feet Factor Surface Measure
6" 5-1/2" 4-1/2" 2.67 1.33
8" 7-1/4" 6-1/4" 1.85 1.23

Questions?
Call us: 704-528-7136

request more information button

Share your knowledge of this product with other customers... Be the first to write a review