Home > Products > Prefinished Exterior Wood Siding > Prefinished Cypress Siding > Cypress Tongue and Groove Siding >

Prefinished Cypress Tongue And Groove Siding - Weathered Gray
Prefinished Cypress Tongue And Groove Siding - Weathered Gray
 


Availability: Usually Ships in 2 to 4 Weeks
Product Code: CYTNG-WEATHERED-GRAY

Questions?
Call us: 704-528-7136
request

Description Coverage / Size Information
 

We take the natural beauty of Cypress tongue and groove wood and factory finish it with a beautiful Weathered Gray stain to give your home a true custom look. This type of stain allows the natural texture of the wood to be seen and changes the color to a weathered gray tone. We machine apply the stain, which allows us to make sure all six sides are coated. When factory finished, the wood is protected against moisture and sun damage that can occur when installing raw and then painting or staining later in the field. The stain provides a water repellent and beautiful rich finish.

Grades Available

Many of our products are available in Select (highest grade possible - occasional tight pin knot acceptable) or #2 Common Grade - sound and possible unsound knots are acceptable.

Profiles Available

Profile shown above is a rough face V-Joint profile which gives you a distinct v-joint where each board comes together. Also available with a smooth face.

Benefits of Pre-Finishing Your Siding

  • Instant Curb Appeal - As the siding is installed you can see the house come to life as there is no waiting for a painter to arrive on-site to cover factory primed boards.
  • No Weather Delays - No weather delays due to poor weather conditions that prohibit a painter from applying the final color coat.
  • Pre-Finishing is available year-round - Our facility is climate controlled and machines run all 12 months.
  • Instant UV and Moisture Protection
  • No Lap Marks
  • No Streaking
  • No Shrink Lines
  • No Overspray or Drips
  • Cost Savings vs. Field Painting
  • Six Sided Protection
  • Factory Controlled Quality - Each board will have a consistent color not only from one end to the other but from the first piece to the last piece the color will be the same.
  • Material is dry prior to installation

Request a Sample:

Call us at 704-528-7136 or fill out our Sample Request Form to have a sample mailed to you.

Note: Computer monitors have inherent limitations, and electronically reproducing color on the Internet is imprecise. Therefore, we cannot assure you that what you see accurately portrays the color. We have gone to great lengths to portray colors as accurately as possible.

Product Details


Sizes: 1" x 6" or 1" x 8" (Nominal Size) V-Joint Tongue and Groove
Material Length: Random lengths from 8' to 16'
Questions?
Call us: 704-528-7136

request more information button

Share your knowledge of this product with other customers... Be the first to write a review


Prefinished LP SmartSide, Cedar Shake Panel - Jefferson Tan
James Hardie, Prefinished HardieSoffit - Hemlock