Home > Products > Wood Ceiling and Wall >

Spruce Prefinished Tongue and Groove Bead Board - Urbane Bronze

Spruce Prefinished Tongue and Groove Bead Board - Urbane Bronze


 


Availability: Usually Ships in 2 to 4 Weeks
Product Code: SPRUCE-TGECB-URBANE-BRONZE

Questions?
Call us: 704-528-7136
request

Description Coverage / Size Information
 

Natural wood boards have been used for interior wall and ceilings for centuries. The beauty of wood is second to none and best of all these boards can be installed vertically or horizontally depending on your desired look. The boards go together with a tongue and groove design and have an edge and center bead profile. In many cases, these boards can be installed to where the nail heads cannot be seen at all. Once installed the finished product looks like one large panel. Whether you prefer the look of natural wood or a darker color the choice is yours.

We take the beauty of real spruce boards and custom factory finish them with an oil-based primer for a good adhesion base for the top-coat. We then apply two coats of acrylic latex paint that has a satin finish for a rich solid color finish. This beautiful color is called Urbane Bronze and is a dark bronze/brown shade found in the neutral color family. See our blog post about using Urbane Bronze as an Exterior Color that may be helpful. The finish is free from lap marks, runs, or streaking and it's a great option to painting on the job site. We recommend using this product for a covered porch application. These can be used as an interior ceiling or wallboard as well.

Wood Grade:

Spruce #2 and Better - Edge and Center Bead Profile

Why Pre-Finish?

  • Instant Curb Appeal - your project will come to life as the material is installed
  • No Weather Delays - No weather delays due to poor weather conditions
  • Pre-Finishing is available year-round - Our facility is climate controlled and machines run all 12 months.
  • Instant UV and Moisture Protection
  • No Lap Marks
  • No Streaking
  • No Shrink Lines
  • No Overspray or Drips
  • Cost Savings vs. Field Painting
  • Six Sided Protection
  • Factory Controlled Quality - Each board will have a consistent color not only from one end to the other but from the first piece to the last piece the color will be the same.
  • Material is dry prior to installation

Request a Sample:

Call us at 704-528-7136 or fill out our Sample Request Form to have a sample mailed to you.

Note: Computer monitors have inherent limitations, and electronically reproducing color on the Internet is imprecise. Therefore, we cannot assure you that what you see accurately portrays the color. We have gone to great lengths to portray colors as accurately as possible.

Product Details


  • Available Size: 1" x 6" (Nominal Size)
  • Grade: #2 and Better Grade Spruce
  • Profile - Edge and Center Bead
  • Material Length: Random Lengths 8'-16'
Questions?
Call us: 704-528-7136

request more information button

Share your knowledge of this product with other customers... Be the first to write a review