Home > Products > Prefinished Exterior Wood Siding > Prefinished Douglas Fir Siding > Douglas Fir Nickel Gap Siding >

Douglas Fir Nickel Gap Siding - Bleaching Stain
Douglas Fir tongue and groove nickel gap siding prefinished in a Bleaching Stain
 


Availability: Usually Ships in 2 to 4 Weeks
Product Code: DFNG-BLEACHING-STAIN

Questions?
Call us: 704-528-7136
request

Description Coverage / Size Information
 

We take the natural beauty of Douglas Fir tongue and groove nickel gap siding and factory finish it with a beautiful Bleaching Stain to give your home a true custom look. This type of stain allows most of the natural texture of the wood to be seen and changes the color to a light white/gray weathered wood tone. The stain is factory applied to all six sides giving it protection against water and sun damage along with saving time and money at the job site. The oil in the stain penetrates the wood and protects more than just the surface of the board making it water repellent and provides a beautiful rich finish.

Grades Available

The grade is #1 and better. This knotty product provides a rustic look and is kiln-dried. Board lengths are available in 8' to 16' random lengths.

Profiles Available

This product features a smooth face providing more of a modern look over a rough sawn face which is typically used for a rustic look. You have the option of either a square edge nickel gap (very similar to shiplap) or a square edge no gap profile. The no gap option does not have a noticeable gap between each row and tends to look like a solid wood wall.

Benefits of Pre-Finishing Your Siding

  • Instant Curb Appeal - As the siding is installed you can see the house come to life as there is no waiting for a painter to arrive on-site to cover factory primed boards.
  • No Weather Delays - No weather delays due to poor weather conditions that prohibit a painter from applying the final color coat.
  • Pre-Finishing is available year-round - Our facility is climate controlled and machines run all 12 months.
  • Instant UV and Moisture Protection
  • No Lap Marks
  • No Streaking
  • No Shrink Lines
  • No Overspray or Drips
  • Cost Savings vs. Field Painting
  • Six Sided Protection
  • Factory Controlled Quality - Each board will have a consistent color not only from one end to the other but from the first piece to the last piece the color will be the same.
  • Material is dry prior to installation

Request a Sample:

Call us at 704-528-7136 or fill out our Sample Request Form to have a sample mailed to you.

Note: Computer monitors have inherent limitations, and electronically reproducing color on the Internet is imprecise. Therefore, we cannot assure you that what you see accurately portrays the color. We have gone to great lengths to portray colors as accurately as possible.

Product Details


Sizes: 1" x 6" or 1" x 8" (Nominal Size) Square edge Nickel Gap one side / No-gap on reverse
Material Length: Random lengths from 8' to 16'
Questions?
Call us: 704-528-7136

request more information button

Share your knowledge of this product with other customers... Be the first to write a review


Douglas Fir Nickel Gap Siding - Pepperwood Stain
Prefinished Cedar Bevel Siding - Cedar Stain
LP SmartSide, Nickel Gap Cedar Texture Siding - Hemlock
Prefinished Cedar Bevel Siding - Bluestone Stain