Home > Products > Prefinished Exterior Wood Siding > Prefinished Cypress Siding > Cypress Shiplap Siding >

Prefinished Cypress Shiplap Siding - Beachgrass Stain
Prefinished Cypress Shiplap Siding - Beachgrass Stain
#2 Common Grade Cypress Shiplap Square Edge
  


Availability: Usually Ships in 2 to 4 Weeks
Product Code: CYSL-BEACHGRASS

Questions?
Call us: 704-528-7136
request

Description Coverage / Size Information
 

We take the beauty of natural Cypress shiplap siding and factory finish it in this beautiful Beachgrass to give your home a true custom look. This type of stain allows the natural wood texture to show through and changes the color to a light golden/tan tone. We machine apply the stain, which allows us to make sure all six sides get coated. When factory finished, the wood is protected against water and sun damage that can occur when installing raw and then painting or staining in the field. The stain provides a water repellent and mildew resistant rich finish.

Grades Available

Many of our products are available in Select (highest grade possible - occasional tight pin knot acceptable) or #2 Common Grade - sound and possible unsound knots are acceptable.

Profiles Available

The profile shown above is a Nickle Gap profile but a Square Edge (no gap) profile is available as well.

Benefits of Pre-Finishing Your Siding

  • Instant Curb Appeal - As the siding is installed you can see the house come to life as there is no waiting for a painter to arrive on-site to cover factory primed boards.
  • No Weather Delays - No weather delays due to poor weather conditions that prohibit a painter from applying the final color coat.
  • Pre-Finishing is available year-round - Our facility is climate controlled and machines run all 12 months.
  • Instant UV and Moisture Protection
  • No Lap Marks
  • No Streaking
  • No Shrink Lines
  • No Overspray or Drips
  • Cost Savings vs. Field Painting
  • Six Sided Protection
  • Factory Controlled Quality - Each board will have a consistent color not only from one end to the other but from the first piece to the last piece the color will be the same.
  • Material is dry prior to installation

Request a Sample:

Call us at 704-528-7136 or fill out our Sample Request Form to have a sample mailed to you.

Note: Computer monitors have inherent limitations, and electronically reproducing color on the Internet is imprecise. Therefore, we cannot assure you that what you see accurately portrays the color. We have gone to great lengths to portray colors as accurately as possible.

Product Details


Sizes: 1" x 6" or 1" x 8" (Nominal Size) Square Edge - No Gap Shiplap
Material Length: Random lengths from 8' to 16'

Share your knowledge of this product with other customers... Be the first to write a review


Cedar Valley Shingle Panel, Pre-Finished - Cape Cod Gray
Prefinished Cypress Bevel Siding - Legacy Gray Stain
James Hardie Panel Siding, Prefinished - Slate