Home > Products > Wood Ceiling and Wall > Tongue and Groove Porch Ceiling Boards >

Spruce Prefinished Tongue and Groove V-Joint Boards - Balmy

Availability: Usually Ships in 2 to 4 Weeks
Product Code: SPRUCE-TGIV-BALMY

Questions?
Call us: 704-528-7136

Description

Coverage / Size Information

Natural wood boards have been used for interior wall and ceilings for centuries. The beauty of wood is second to none and best of all these boards can be installed vertically or horizontally depending on your desired look. The boards go together with a tongue and groove design and in many cases can be installed to where the nail heads cannot be seen at all. Once installed the finished product looks like one large panel.

We take the beauty of real spruce boards and custom factory finish them with an oil-based primer for a good adhesion base for the top-coat. We then apply two coats of acrylic latex paint that has a satin finish for a rich solid color finish. This beautiful color is called Balmy. It's light blue shade (with just a hint of green) is considered by many to be one of the shades of "Haint Blue". Balmy is part of the historical southern coastal color palette. The finish is free from lap marks, runs or streaking and it's a great option to painting on the job site. We recommend using this product for a covered porch application. These can be used as an interior ceiling or wallboard as well.

Wood Grade:

Spruce #2 and Better

Why Pre-Finish?

Instant Curb Appeal - your project will come to life as the material is installed
No Weather Delays - No weather delays due to poor weather conditions
Pre-Finishing is available year-round - Our facility is climate controlled and machines run all 12 months.
Instant UV and Moisture Protection
No Lap Marks
No Streaking
No Shrink Lines
No Overspray or Drips
Cost Savings vs. Field Painting
Six Sided Protection
Factory Controlled Quality - Each board will have a consistent color not only from one end to the other but from the first piece to the last piece the color will be the same.
Material is dry prior to installation

Request a Sample:

Call us at 704-528-7136 or fill out our Sample Request Form to have a sample mailed to you.

Note: Computer monitors have inherent limitations, and electronically reproducing color on the Internet is imprecise. Therefore, we cannot assure you that what you see accurately portrays the color. We have gone to great lengths to portray colors as accurately as possible.

Product Details

Available Size: 1" x 6" (Nominal Size)
Grade: #2 and Better Grade Spruce
Material Length: Random Lengths 8'-16'

Questions?
Call us: 704-528-7136

Share your knowledge of this product with other customers... Be the first to write a review

	LP SmartSide Prefinished Panel Siding - Tan
	Prefinished Cypress Shiplap Siding - Seacoast Gray Stain
	James Hardie, Prefinished Cedarmill Lap Siding - Cinder