Home > Products > Prefinished Shingle Siding > Cedar Valley Shingle Panels >

Cedar Valley Shingle Panel, Pre-Finished - Beachgrass
Cedar Valley Shingle Panel, Pre-Finished - Beachgrass
 


Availability: Usually Ships in 2 to 4 Weeks
Product Code: CVSP-BEACHGRASS-SS

Questions?
Call us: 704-528-7136
request

Description Coverage / Size Information
 
Cedar Valley shingle panels are a great way to achieve the look of real Cedar Shingle siding without all the painstaking work of hanging individual shingles. Each shingle panel is handmade in their manufacturing facility in California and use three layers of high quality materials to construct each panel. The first layer is a backer board made from 11/32" Doug Fir plywood which provides the base for the panel. The outer material is Kiln dried western red cedar shingles hand selected for the proper size of the panel. Sandwiched between the backer board and the shingles is a premium fiberglass matte which provides additional UV protection and durability. Cedar Valley strongly recommends that these panels be prefinished in a factory with a minimum semi-transparent stain before installation.

Our Beachgrass color is created by using a semi-solid deep penetrating stain. This stain will provide a rich colored finish that will still allow the natural wood texture to show through. The stain is factory machine applied to five sides giving it protection against water and harmful UV rays from the sun.

Benefits of Using Cedar Valley Shingle Panels:
  • Each panel is handmade
  • Much easier to install than individual shingles
  • 100% Kiln dried Western Red Cedar
  • Panels are 8 feet in length.

Prefinished Benefits:

  • Factory Controlled Quality - Each board will have a consistent color not only from one end to the other but from the first piece to the last piece the color will be the same.
  • Five sided coverage - the face, edges, ends and keyways (spaces between the shingles) have an even coverage of stain.
  • Weather Delays are not a factor since each board is painted you will have instant curb appeal as the final color has already been applied.
  • No more runs, drips, shrink lines, streaking and lap marks. You will get a consistent finish on all boards.
  • Instant UV and moisture protection

Request a Sample:

Call us at 704-528-7136 or fill out our Contact Us Form to have a sample mailed to you.

Note: Computer monitors have inherent limitations, and electronically reproducing color on the Internet is imprecise. Therefore, we cannot assure you that what you see accurately portrays the color. We have gone to great lengths to portray colors as accurately as possible. The best way to see the actual color is for us to provide you with a sample. Call us or send us an e-mail to request samples.
Cedar-Valley Shingle Panel Installation

Product Details


  • Manufacturer: Cedar Valley
  • Textures Available: Even Buttline or Staggered Buttline Open Keyway
  • Material: Western Red Cedar Handcrafted Panel
  • Exposure: 7-1/8" (9" Panel Height), 5.3" and 4.25"
  • Length: 8 Feet
  • Thickness: 5/16" Nominal
  • See the technical specifications tab above for coverage information.
Questions?
Call us: 704-528-7136

request more information button

Share your knowledge of this product with other customers... Be the first to write a review


Cypress Prefinished Tongue And Groove V-Joint Boards - Provincial
LP SmartSide Prefinished Panel Siding - Light Gray
Nichiha, Prefinished Fiber Cement Soffit - Cedar