Home > Products > Prefinished Exterior Wood Siding > Prefinished Cedar Siding > Prefinished Cedar Bevel Siding >

Prefinished Cedar Plain Bevel Siding - CVG Grade

Prefinished Cedar Plain Bevel Siding - CVG Grade


 
Alternative Views:




Availability: Usually Ships in 2 to 4 Weeks
Product Code: CEDAR-BEVEL-SIDING-CVG

Questions?
Call us: 704-528-7136
request

Description Coverage / Size Information
 
Bevel Siding (also known as clapboard, lap siding or weatherboard) is a type of siding where the boards are installed horizontally with the top board overlapping the bottom to provide a seal to protect the interior of the home. The use of Western Red Cedar for bevel siding is one of the most widely-used siding types. The bottom side (or butt side) will be thicker than the top side of the board and most of the time one side will be rough cut and the other side will be smooth.

Wood Grades:

A&Better Grade - This is a fine appearance grade that allows only slightly more growth characteristics than Clear Heart. Pieces are of mixed grain.These mixed grain (vertical and flat) pieces are graded from the surfaced face.
Clear Vertical Grain - This is the highest bevel siding grade. All Clear V.G. Heart grade is sawn vertical grain (edge grain) and is kiln dried. Pieces have a smooth face of decay-resistant heartwood and are free from growth characteristics that affect appearance or performance. Pieces have excellent dimensional stability and hold finishes exceptionally well.

Why Pre-Finish?

  • Instant Curb Appeal - As the siding is installed you can see the house come to life as there is no waiting for a painter to arrive on site to cover factory primed boards.
  • No Weather Delays - No weather delays due to poor weather conditions that prohibit a painter from applying the final color coat.
  • Pre-Finishing is available year round - Our facility is climate controlled and machines run all 12 months.
  • Instant UV and Moisture Protection
  • No Lap Marks
  • No Streaking
  • No Shrink Lines
  • No Overspray or Drips
  • Cost Savings vs. Field Painting
  • Six Sided Protection
  • Factory Controlled Quality - Each board will have a consistent color not only from one end to the other but from the first piece to the last piece the color will be the same.
  • Material is dry prior to installation
  • Coating Warranties are Available
  • "Green"/Low V.O.C. Coatings are available.

Request a Sample:

Call us at 704-528-7136 or fill out our Sample Request Form to have a sample mailed to you.

Note: Computer monitors have inherent limitations, and electronically reproducing color on the Internet is imprecise. Therefore, we cannot assure you that what you see accurately portrays the color. We have gone to great lengths to portray colors as accurately as possible.

Product Details


Grades and Sizes Available:
Western Red Cedar 1/2" x 6" Bevel Siding - A&Better Grade
Western Red Cedar 1/2" x 8" Bevel Siding - A&Better Grade
Western Red Cedar 3/4" x 8" Bevel Siding - CVG (Clear Vertical Grain)

Share your knowledge of this product with other customers... Be the first to write a review